High Voltage EIS Test System

  Gamry introduces the new LPI1010 a high voltage test system for Electrochemical Impedance Spectroscopy (EIS) up to 20kHz. This new instrument offers advantages to researchers who wish to study electrodes and mechanisms in batteries, fuel cells and electrolyzers. Vehicle electrification requires changes in how batteries and fuel cells are tested. The need continues to Read more about High Voltage EIS Test System[…]

Dr. Chris Beasley Sales Mgr. Gamry Instruments

The ECS Community Adapts and Advances

In ECS series, The ECS Community Adapts and Advances, Chris Beasley shares his upbeat thoughts about the future while recognizing the challenges of the present. The COVID-19 pandemic has come with its share of challenges.  Nevertheless Dr. Beasley is confident we will get through this: “The science must go on, and eventually, the science will prevail.  Read more about The ECS Community Adapts and Advances[…]

Penn State Annual Corrosion Short Course

Gamry Instruments to Co-Sponsor the 24th Annual Penn State University Corrosion Short Course

Registration is open for The Penn State University’s 24th Annual Corrosion Short Course scheduled for June 7-12, 2020 at the University Park Campus in State College, PA (USA). Gamry Instruments will be a co-sponsor for the course. Philadelphia, PA, January 27, 2020 – Registration is now open for the annual Penn State University Corrosion Short Read more about Gamry Instruments to Co-Sponsor the 24th Annual Penn State University Corrosion Short Course[…]

PlugVolt 2020 Battery Seminar

The PlugVolt Battery Seminar is Scheduled for July 21-23, 2020

Gamry Instruments will be attending the Battery Industry’s most anticipated event – the PlugVolt Battery Seminar on July 21-23 in Plymouth, MI (USA) Philadelphia, PA, January 16, 2020 – Gamry Instruments will be attending the PlugVolt annual Battery Seminar from July 21st thru July 23rd, 2020.  The seminar is being held at The Inn at Read more about The PlugVolt Battery Seminar is Scheduled for July 21-23, 2020[…]

Gamry Instruments to Participate in a Presentation at NACE Corrosion 2020

Gamry Instruments’ Presentation at NACE CORROSION 2020 Conference dates have been updated to June 14-18, 2020

NACE Corrosion 2020 to feature a presentation by Gamry Instruments’ David Loveday This Conference dates have been updated to:  June 14-18, 2020 Warminster, PA, October 14, 2019 – NACE Corrosion 2020, the world’s largest conference and exposition on corrosion, is being held March 15-19, 2020 at the George R. Brown Convention Center in Houston, TX. Read more about Gamry Instruments’ Presentation at NACE CORROSION 2020 Conference dates have been updated to June 14-18, 2020[…]

EIS Short Course November 2019

A New Two-Day Hands-on EIS Short Course Philadelphia

When:  November 11-12, 2019 Where:   Windsor Suites 1700 Benjamin Franklin Parkway Philadelphia, PA (USA) Gamry Instruments is proud to once again co-sponsor the EIS (Electrochemical Impedance Spectroscopy) Short Course being held November 11th-12th at the Windsor Suites, 1700 Benjamin Franklin Parkway, Philadelphia, PA (USA). This year the two-day, hands-on course is designed for researchers who are Read more about A New Two-Day Hands-on EIS Short Course Philadelphia[…]

Quartz Crystal Microbalance Instruments Which Include Impedance and Dissipation

MicroVacuum’s Quartz Crystal Microbalance Instruments

Gamry Announces Exclusive Distribution of MicroVacuum’s Quartz Crystal Microbalance Instruments Which Include Impedance and Dissipation Philadelphia, PA, September 6, 2018.   Gamry Instruments of Warminster, PA is pleased to announce a strategic partnership with MicroVacuum of Budapest, Hungary.  The agreement awards Gamry exclusive distribution of their Quartz Crystal Microbalance instruments. This line of QCMs includes 3 Read more about MicroVacuum’s Quartz Crystal Microbalance Instruments[…]

Polarization resistance Rp taken from fitting the data for various samples to the equivalent circuit in Figure 3. Error bars represent the fitting error. Maximum Rp detectable was 10 GΩ.

Electrochemical Impedance Spectroscopy on Curved Electrodes

Gamry added a new Technical Note in the  electrochemical impedance spectroscopy (EIS) section of their Application Notes on their web site Gamry.com. This note assumes that you have read and understand the material covered in the Application Note “Basics of Electrochemical Impedance Spectroscopy.” The purpose of this Technical Note is to show that you can Read more about Electrochemical Impedance Spectroscopy on Curved Electrodes[…]

Gamry Presenting Free Workshop at ACS National Meeting

Gamry Instruments will present a free exhibitor workshop at the American Chemical Society National Meeting and Exposition March 18th – March 22nd.  The presentation is scheduled for Monday March 19th, 2::30-3:30 at Exhibitor Theater 2, Exhibit Hall B2 in the Ernest N. Morial Convention Center New Orleans, LA (USA).  The theme for the 255th ACS Read more about Gamry Presenting Free Workshop at ACS National Meeting[…]

Laboratory Course in Electrochemistry

Modular Version of the Laboratory Course in Electrochemistry

Gamry Instruments has added to their Laboratory Course in Electrochemistry by making ‘modular’ Experiment Kits based on the institution’s needs Gamry Instruments has introduced a new version of the Laboratory Course in Electrochemistry. This course in electrochemistry has been designed to be modular based on the institution’s needs. If you do not want to run Read more about Modular Version of the Laboratory Course in Electrochemistry[…]

Interface 1010E

Gamry Introduces New Interface Potentiostats

Gamry has officially launched their new Interface series potentiostats with the 1010. The Interface 1010 replaces the previous 1000 series and is available in the Interface 1010E, 1010B and the 1010T. The Interface 1010 boasts new features including a built-in temperature monitor using an RTD (Resistance Temperature Detectors) probe available on both models.  The Interface 1010E Read more about Gamry Introduces New Interface Potentiostats[…]

Stack Mode Measurements - 3 electrode mode

Value of Stack Mode Measurements

Some researchers want to be able to apply or measure voltages larger than 12 V. One example of the need for larger potentials is battery testing, while another might be CV inside small microfluidic channels. Perhaps you want to perform certain types of electrodeposition experiments. In these instances you may need to look a little Read more about Value of Stack Mode Measurements[…]

This website uses cookies to ensure you get the best experience on our website. More information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this. Please review our Privacy Policy

Close